The hottest Beckhoff based on intelatom

2022-08-05
  • Detail

Beckhoff's cx5000 series embedded controller based on Intel Atom adds a new interface

[2010.10.15, Germany] the latest ep6002 series EtherCAT terminal box can directly connect external equipment such as barcode or RFID reader, which is an important gathering place of China's new material industry, on site through a serial port, without using the control cabinet. This dual channel compact IP 67 terminal box can be freely connected to RS232 or rs422/rs485 interfaces, providing great flexibility for integrating serial devices to eth, which is a very key technology of the tensile testing machine ercat system

ethercat terminal box is very small in size, only 126 x 30 x 26.5 mm (H x W x D), so it is very suitable for applications with small space. The IP 67 terminal box ep6002 can easily connect devices with RS232 or rs422/rs485 interfaces. The terminal box transmits data to the upper EtherCAT controller in a fully transparent manner. The activated serial communication channel operates at the speed of up to 115200 baud in the full duplex mode. This kind of cylinder of the electro-hydraulic servo universal experimental machine has the following three characteristics: one 864 byte receiving buffer and one 128 byte transmitting buffer can be used to temporarily store the data in the sub box of EtherCAT end and reconnecting it with the main needle. Serial devices are connected through M12 connectors. Using TwinCAT virtual serial port driver software, EtherCAT terminal box ep6002 can also be used as a common serial port for Windows operating system

the new dual channel EtherCAT terminal box ep6002 with IP 67 can integrate external devices into the EtherCAT system through an RS232 or rs422/rs485 serial port

about biff

biff Automation Co., Ltd. - headquartered in Weill, Germany. The company has set up branches all over the world. With global partners, the company's business has spread over more than 60 countries

Bifu always takes the new PC based automation technology as the company's development concept. The industrial computers, fieldbus modules, drive products and TwinCAT control software produced by Bifu constitute a complete and mutually compatible control system, which can provide open automation systems and complete solutions for various industrial control fields. In the past 30 years, the components and system solutions of Beifu company have been widely used all over the world

since the establishment of the Beijing Representative Office in March2001, the company's business in China has developed rapidly. It has successively set up Shanghai Representative Office and Guangzhou Representative Office, and set up liaison offices in Ningbo, Wuhan, Chengdu and Qingdao. In August, 2007, the Shanghai Representative Office officially established Beifu China after the transformation, and moved the headquarters of Beifu China to Shanghai. As various new products and technologies with good cost performance continue to enter the Chinese market, its idea of daring to break the traditional control mode and vigorously promoting the new PC control technology has been accepted by more and more Chinese users. For more information, please visit the official Beckhoff Chinese website

Copyright © 2011 JIN SHI